Filscha Nurprihatin; Meilily Angely; Hendy Tannady
Abstract
In the manufacturing process, the machine is very important because downtime can inhibit and even stop production. We focused on the highest downtime that occurred in a particular product line and critical machine. This research contributes to overcoming and making the machine's performance and ability ...
Read More
In the manufacturing process, the machine is very important because downtime can inhibit and even stop production. We focused on the highest downtime that occurred in a particular product line and critical machine. This research contributes to overcoming and making the machine's performance and ability better. We make use the Total Productive Maintenance (TPM), which started by calculating Overall Equipment Effectiveness (OEE) and Six Big Losses. This study also provides the maintenance attempt to increase the effectiveness and to eliminate losses incurred by calculating Mean Time Between Failure (MTBF) and Mean Time To Repair (MTTR). Finally, we proposed the TPM implementation to improve the effectiveness of the machine. The result showed that the OEE has not reached the ideal value due to the low availability. Breakdown losses contributed to the biggest factor in the loss. The way to overcome the cause of breakdown losses is to increase performance maintenance, by calculating and evaluating MTBF and MTTR. This research presented the cause of the low value of OEE, provided the performance maintenance policy according to MTBF and MTTR, and proposed the TPM implementation.
Renewable Energy
Filscha Nurprihatin; Agnes Octa; Tasya Regina; Tony Wijaya; Julliete Luin; Hendy Tannady
Abstract
From 2001 to the present, natural gas production in Indonesia dominates petroleum production. Most of the natural gas is used for export until 2013. From 2014 until now, most of the natural gas production is being utilized for domestic with an increasing trend. Domestic gas usage for households is still ...
Read More
From 2001 to the present, natural gas production in Indonesia dominates petroleum production. Most of the natural gas is used for export until 2013. From 2014 until now, most of the natural gas production is being utilized for domestic with an increasing trend. Domestic gas usage for households is still far below industry and commercial sectors. Domestic gas usage in the household can be done in two ways, namely city gas and Liquefied Petroleum Gas cylinder. The use of city gas is better in terms of price, mitigation, and gas emission. The government plans to build a new city gas network for 4,000 households. This study aim is to propose the design of city gas network, so the construction and operational costs become minimal. This research uses three stages, namely division of region by using the clustering algorithm, the gas network route determination using heuristics algorithm, and determination of the feasibility using the Benefit-Cost Ratio. We have successfully calculated the maximum region’s capacity by making use of Weymouth Formula. The iterative clustering algorithm is done to make sure the location of Distribution Centers is well-defined. We modified the distance measurement by preferring driving distance rather than Euclidean in the interest of precision. In the end, we also discuss the feasibility study of the project. Based on the calculation, we have obtained that the gas network development project is feasible to run.